1. Place the receiver and the Bluetooth® audio source within one meter of each other.

2. With the receiver off, press and hold the control button for 6-7 seconds until the LED rapidly flashes red and blue. This puts the receiver in pairing mode lasting for 2 minutes.

3. Activate the Bluetooth® search function of your audio device or mobile phone. Once the receiver is found (will appear as: DEWALT Adaptor DCR002) confirm pairing on your device. Once pairing is successful the rapid red/blue flashing of the LED will cease and the indicator will flash blue once every 5 seconds. If paired successfully, your audio device should now show as connected with the receiver.

4. Consult with your device’s owner’s manual for details on pairing and connecting.