Vibration value for the DW292 / DW294 Impact Wrench
Ah = 5.0 m/s^2 : Where Ah is the tri-axial vector sum hand arm weighted vibration as measured per the EN60745 test standard.
This declared value was obtained by laboratory type testing in compliance with the stated standard and is not adequate for use in risk assessments. Values measured in individual work places may be higher than the declared value. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece / accessory interaction and the workstation design, as well as upon the exposure time and the physical condition of the user.
We, (Stanley Black+Decker Corp.), cannot be held liable for the consequences of using the declared value, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control.