SPECIALTY AND OTHER TOOLS
- What are the jaws of the DEWALT DCE200 Press Tool made of?
- What is the part number for replacement blades for the DEWALT 20V MAX DCP580 planer?
- Can other bulbs work in the DEWALT flashlights and floodlights?
- What are the horizontal and vertical fan angles and the line lengths at a given working distance?
- Does the DW618 router have a soft start feature?
- What cord sets are available for the DW616 and DW618 routers?
- What is the diameter of the DW618 motor?
- Can I buy knives from another manufacturer for the DW733 planer?
- What are the angles of the knives on the DW733 Portable Thickness Planer?
- Does the DW618B3 2 1/4 HP Three Base Router Kit include the DW6913 Edge Guide?
- Are replacement blades available for DEWALT hand held planers?
- What types of materials will the DC550 and DW660 Cut Out Tools cut?
- Can a circle cutter be used with the DW660?
- DW7331 and DW734 dust hood port sizes
- What screws are required to attach the dust port on the DW734 Planer?
- What is the thread size and pitch of the threaded rods that run the cutterhead up and down on the DW733 and DW734 Heavy Duty 12" Planers?
- What is the feed rate on the DW733 and DW734 12" Portable planers?
- What are the dimensions of the DW734 12 1/2" Portable Thickness Planer?
- Can I operate the DW734 on 50 Hz?
- How many screws and washers are needed to attach the DW7331 dust hood to the DW733 and DW734?
- What are the CFM requirements for vacuum systems attached to the DW733 and DW734?
- How do I adjust the cutter head on my DW733/DW734 so it is parallel to the base?
- Plane Material- Is it okay to plane painted wood?
- What should I use to clean the rollers on my DEWALT Bench Planer?
- Why did my DW735 planer stall and stop working?
- What is the procedure for installing the V-belt on the DW735 planer?
- What are the dimensions of the mounting holes on the DW735 planer?
- Can the DW735 Portable planer be used overseas running on 240v/50hz current?
- What is the feed rate of the DW735 13" Portable Thickness Planer?
- The cutter head on my DW735 turns but the feed rollers will not turn. What could be causing this problem?