Problem with 735x planer
Respondida
The feed rollers stop as soon as the wood touches then. The plate is smooth, the rollers work as long as no wood is touching them, the speed knob is turned all the way while the machine is on ( problem exists on both speeds ). For a better understanding watch the video in this link https://youtu.be/teEU3goOT7c and in this one to show a close up https://youtu.be/6ZS7VyfvOGQ
I really hope someone out there can help me fix this. The planer is only 2 month old and barely used it
-
Hello Joe
We apologize for the delay in our response.
If the material is not feeding please check the steps below:
- • excess clogging in the dust shroud.
- • excess oil/debris from feed rollers.
- • a broken drive belt.
- • make sure the speed selection lever is engaged in speed ‘1’ or ‘2’.
If after checking those steps the issue remains please contact our support team
Iniciar sesión para dejar un comentario.
Comentarios
1 comentario